Customized high speed dispensing machine, glue machine!

威尼斯城所有登入网址  

Dongguan CNAUTO Automation Co., LTD.

13928403389

writer:点胶机厂家 click:240

Controlling the application of white latex in gluing and bonding is recommended to use automatic control of white latex dispensing machine for auxiliary use. The question of how long the white latex dries is often questioned in the process of user applica.

writer:点胶机厂家 click:123

The dispensing syringe is a kind of accessory which is simple and easy to manufacture and low cost. Especially the piston dispensing syringe is the mainstream rubber storage tool. The piston is driven by pneumatic pressure to control the speed of glue flo.

writer:点胶机厂家 click:129

Dual-station 4331 dispenser can be used in the manufacture of products with large demand and consistent demand. In order to ensure the production stability and glue flow control, pressure barrels are needed to assist in the use. Stainless steel pressure b.

writer:点胶机厂家 click:116

Plug needle dispensing valve is a kind of rubber control valve which extrudes glue by pneumatic driving ejector rod. The 2121 dispensing valve manufactured by the middle system belongs to a kind of rubber control valve with good performance in a wide rang.

writer:点胶机厂家 click:112

Early factories used glue for coating mainly through manual dispensing mode. At that time, the accuracy control range was not accurate, and the high demand for the accuracy of the motherboard dispensing was often not fully applicable. The manual dispensin.

writer:点胶机厂家 click:240

Plastic dispensing needle is one of the most widely used accessories in automatic dispensing machine. It has the characteristics of quick disassembly, convenient use and low cost. It can be used to complete the work of fixing electronic products or dispen.

writer:点胶机厂家 click:234

Extrusion cylinder, also known as dispensing syringe, is mainly used to store rubber and provide pressure-driven extrusion through an air compressor. It is an indispensable part of dispensing link. Manual operation or automatic equipment for contact dispe.

writer:点胶机厂家 click:203

The dispensing syringe is commonly known as extrusion tube, which is mainly used for storing glue. The automatic dispensing syringe can be loaded with syringe or with glue valve dispensing, which is relatively low in use and cost. The syringe made of stai.

writer:点胶机厂家 click:224

The performance and application effect of visual dispensing machine is obvious to all. It is mainly used in batch production and high precision control production space. Selecting metering dispensing valve for quantitative control of glue quantity has bot.

writer:点胶机厂家 click:136

The dispensing process of most small products should have high accuracy, such as electronic parts, etc. There are many potential factors that may affect the precision dispensing of automatic dispensing machine. The accuracy control of the aluminum needle .

writer:点胶机厂家 click:120

The glue dispensing machine is mainly used in the production line which needs full automatic dispensing and glue filling. It is the leading equipment in the industry with the advantages of good precision control and low cost. The guarantee of stable dispe.

writer:点胶机厂家 click:147

According to the analysis of the current automatic dispensing industry, the demand for 300cc dispensing syringes is rising in a straight line, and the proportion of glue application on the market is high. In order to control the glue dispensing by chip se.

writer:点胶机厂家 click:1835

Dual-liquid dispensing valves are widely used in the glue filling industry, which is more in line with the requirements of glue output. Because the dispensing accuracy of dual-liquid dispensing valves is not high, but the glue output is relatively large. .

writer:点胶机厂家 click:1731

Hot melt glue dispensing valve is a valve specially used hot melt glue. A heating device is installed on the ordinary dispensing valve, which can heat the hot melt glue at about Baidu. Hot melt glue only has the function of bonding at more than 100 degree.

writer:点胶机厂家 click:1367

Electric stirring dispensing valve last night special dispensing accessories for automatic double-liquid dispensing machine, using two kinds of glue mixed dispensing, very convenient to use with explosion-proof electric box, but also to meet the requireme.

writer:点胶机厂家 click:853

There are many reasons for abnormal glue. It is mainly based on the actual situation that we can judge perfectly what caused the abnormal glue of precision dispenser. Every abnormal glue will cause different problems. According to these problems, we can j.

writer:点胶机内存卡 click:1010

All-aluminium needle is made of plastic and aluminium alloy, which can ensure the glue process and low price. Aluminum alloy production is very expensive, which will lead to the failure of products to reach daily sales. The method of making all-aluminium .

writer:点胶机内存卡 click:148

The use of superheated melt glue knows the characteristics of glue. It is impossible to dispense glue without heating. Many people believe that only hot melt dispensing valve can dispense glue. However, a hot melt dispensing syringe can be manufactured in.



威尼斯城自动化设备有限公司全力为用户打造各种实用性强的高速全自动点胶机 大型高速点胶机 落地式高速点胶机

XML 地图 | Sitemap 地图