Customized high speed dispensing machine, glue machine!

威尼斯城所有登入网址  

Dongguan CNAUTO Automation Co., LTD.

13928403389

Functional description of double-liquid dispensing machine p

作者:周周   日期:2019-10-10 10:37   浏览:

As a relatively new industry, there are still many customers who know little about the dispenser. The following is a description of the panel function of the dual-liquid dispenser.
 
 双液AB涂胶点胶机
Double-liquid AB glue dispenser
 
Function description of double liquid dispenser panel:
 
Vacuum backdraft: The knob is a fine-tuning switch, which controls the compound in the whole panel function. When the glue used is very thin, you can turn the knob properly until the glue in the syringe does not drip or bubbles.
 
 
 
There are three control air pressure numerical panels in the panel function of double liquid dispenser:
 
Tracheal Connector: For tightening 6 mm diameter pipes
 
Barometric Display Meter: Displays the current output barometric pressure.
 
Air pressure regulating knob: used to regulate the output air pressure (knob can only be adjusted after pulling out, it is important to press the knob switch when regulating air pressure to ensure that air pressure is not regulated)
 
 自动填充涂胶机
Automatic Filling and Coating Machine
 
Dip switch is used to adjust the time of dispensing machine in the panel function of double liquid dispensing machine.
 
Automatic time control switch:
 
Quantitative dispensing: dispensing machine time to reach a fixed time controlled by dip switch
 
Continuous dispensing: When the stable gear is reached, the dispensing time is fixed at 0.2 seconds per step (signaling). When the continuous step (signaling), dispensing is always carried out. When the switch is off, the power supply will be automatically cut off.
 
 
 
 R轴涂胶点胶机
R-axis glue dispensing machine
 
Power Indicator Lamp: Used to Indicate whether the power is turned on or not
 
 
 
Functional parameters of various double-liquid dispensing machine panel: power supply: AC220V (50/60HZ), power supply: 9-12w, air source: 0.5-0.7 MPa, dispensing pressure regulation range: 0-0.6 MPa, dispensing time regulation range: 0.01-9.99 seconds, dispensing mode: signal + dispensing time control (quantitative dispensing), signal control (continuous dispensing), dispensing start signal: Off, external input signal (DC 5V-24V), suction function: built-in vacuum generator 0-35 MPa operating temperature range: 5-40 MPa


威尼斯城自动化设备有限公司全力为用户打造各种实用性强的高速全自动点胶机 大型高速点胶机 落地式高速点胶机

XML 地图 | Sitemap 地图